Wood carving production process

Wood carving system to do the process includes: wood live, spin, live, chisel live, shovel live, not live, wear, coloring, hot wax, paint live.

1, wooden live: refers to the carpentry with the production of components to be carved, including the components of the furniture, the basic outline of the sculpture and so on.

2. Spinning live: Finger wood working together with the components to be carved, such as the shape and interior of the pen holder, the face of the wooden seat, the tooth, the waist and so on.

3, not live: refers to the use of wire saws pattern hollowed out a good flower board, so that it is similar to the silhouette effect to be carved standby. The above is the preparation process for engraving.

4. Chiseling: Using chiseling a live chisel and patting an axe or hammer, first go to the block to cut out the basic shape, and then prepare for shoveling and sending live work until the work is basically shaped.

5. Scooping live: Use the shovel and live chisel for fine processing, scoop to the spirit that does not have any traces and meet the design requirements, and then use the slip hook to live until the best effect.

6. Livelihood: The mallet is an auxiliary tool for the chisel, especially for hollowing out the wall of a good flower board. The mallet plays a major role.

7. Grinding: The method of mass-transmitting first uses water to blow up the wooden thorns, and then grinds the pulp with sandpaper or sward to make the surface of the wood carving smooth and clean. Now more use of high-grade water sandpaper instead of the same effect.

8, color: This is a deep technical knowledge, a piece of work ingredients and then be careful, there will be color differences after water, relying on experienced painters to darken the darker or lighter darker, so that The color is the same.

9, hot wax: wax is a high-end crafts surface treatment. The traditional practice is to use Chuan Wax and beeswax to make wax pastes according to different seasons. Different types of formulas are used to make wax paste. Charcoal is used to bake wood into the wood and the remaining wax is removed after the wax is cool. The wood used in wood carving handicrafts The wood carvings require more stringent materials. The line says: “Stand does not stand still.” The harder the material is, the more rigid it is, the harder it will be, the better it will be. From an artistic point of view, it is better to be able to exquisitely cut, fold over, fold, and cut stems. In addition, the beauty of the texture, color, and texture of the wood itself can also express the effect of the wood carving. A lot of valuable timber, wood carving industry commonly used red sandalwood, pear, red rosewood, chicken wing wood, iron wood, rosewood, boxwood, Phoebe and so on. Generally used non-expensive wood is beech, beech, walnut and so on.